Ⅰ. Machine structure features
1.Horizontal grinding head
The horizontal grinding head adopts high-precision flange type spindle design. With three pairs of super-precision angular contact bearings (made in Japan/Germany), using high-temperature resistant high-grade lubricating grease, completely sealed, no need for additional maintenance. Therefore, it can maintain high quality characteristics such as low noise, high precision and low temperature during grinding.
2.Worktable drive
The worktable adopts the fully supported double V self-positioning type hard rail design, the base rail is processed by high frequency, HRC55°±3°, the worktable rail is affixed with PTFE rail tape, to ensure the good smoothness and guidance of the table motion rail.
3.Gantry frame
The lower part of the double column is firmly connected with the bed, the upper part is tightly connected with the beam, and the machine bed, the double column and the beam form a rigid closed frame structure.
4.Grinding head drive
The grinding head is equipped with AC servo electric drive, with large torque and accurate feed.
5.Grinding wheel
The grinding machine is equipped with a safety type grinding wheel with buffer protection device. The wheel adopts reasonable structural transformation, so that the safety of the operator is guaranteed.
6.Lubrication system
The machine base adopts automatic circulating lubrication device. The horizontal and vertical motion guide rails and the ball screw adopt timing and quantitative automatic lubrication device, the operation is humanized, and the machine runs safely and reliably.
7.Cooling system
The machine coolant device is recycled after multi-stage filtration.
8.Pipeline protection
The horizontal and vertical movement pipelines of the machine adopt towline mechanism, which is safe and beautiful.
9.Hydraulic control system
The hydraulic system uses an independent hydraulic station. The hydraulic system controls the balance of the longitudinal movement of the worktable and the vertical movement of the grinding head.
10.Electric Magnet
The electric permanent magnet does not need electric energy during the working process, and only uses the permanent magnetic suction to hold the workpiece. It does not use any energy in work and produces safe, strong and efficient power, which is economical and environmentally friendly.
Ⅱ.Machine tool control function
1.Operation panel
The operation panel is easy to run machine. The button board are integrated together. Such illuminated buttons can be operated as well as related status displays.
2.Operating system touch screen
The operating system of the machine adopts Touch Screen.
III. Main parameter
Item |
Unit |
HG-2340NC |
|
Capacity |
Max. grinding size(W*L) |
mm |
2000*4000 |
Worktable size(W*L) |
mm |
1800*4000 |
|
Max. thinckness |
mm |
600 |
|
Net width of inside |
mm |
2300 |
|
Max. Loading weight |
KG |
15000 |
|
Electric disk size |
mm |
1800*4000 |
|
Grinding head |
Spindle motor |
KW |
22 |
Spindle size |
mm |
Ф170 |
|
rpm |
rpm |
1400 |
|
Grinding wheel size |
mm |
Ф500x80x203 |
|
Motor Power |
Worktable drive motor |
KW |
30 |
Left and right moving motor |
KW |
2.0/10N.M |
|
Up and down moving motor |
KW |
2.0/15N.M |
|
Water pump motor |
KW |
0.5 |
|
Speed |
Front and back moving speed |
M/min |
5-28 |
Left and right moving speedr |
mm/min |
5-3000 |
|
Up and down moving speed |
mm/min |
5-3000 |
|
Size |
Space |
mm |
11000*4600 |
Machine height |
mm |
3600 |
|
Machine Weight |
KG |
45000 |
|
Other |
Power supply |
V/HZ |
380V-50HZ |
Ⅰ. Machine structure features
1.Horizontal grinding head
The horizontal grinding head adopts high-precision flange type spindle design. With three pairs of super-precision angular contact bearings (made in Japan/Germany), using high-temperature resistant high-grade lubricating grease, completely sealed, no need for additional maintenance. Therefore, it can maintain high quality characteristics such as low noise, high precision and low temperature during grinding.
2.Worktable drive
The worktable adopts the fully supported double V self-positioning type hard rail design, the base rail is processed by high frequency, HRC55°±3°, the worktable rail is affixed with PTFE rail tape, to ensure the good smoothness and guidance of the table motion rail.
3.Gantry frame
The lower part of the double column is firmly connected with the bed, the upper part is tightly connected with the beam, and the machine bed, the double column and the beam form a rigid closed frame structure.
4.Grinding head drive
The grinding head is equipped with AC servo electric drive, with large torque and accurate feed.
5.Grinding wheel
The grinding machine is equipped with a safety type grinding wheel with buffer protection device. The wheel adopts reasonable structural transformation, so that the safety of the operator is guaranteed.
6.Lubrication system
The machine base adopts automatic circulating lubrication device. The horizontal and vertical motion guide rails and the ball screw adopt timing and quantitative automatic lubrication device, the operation is humanized, and the machine runs safely and reliably.
7.Cooling system
The machine coolant device is recycled after multi-stage filtration.
8.Pipeline protection
The horizontal and vertical movement pipelines of the machine adopt towline mechanism, which is safe and beautiful.
9.Hydraulic control system
The hydraulic system uses an independent hydraulic station. The hydraulic system controls the balance of the longitudinal movement of the worktable and the vertical movement of the grinding head.
10.Electric Magnet
The electric permanent magnet does not need electric energy during the working process, and only uses the permanent magnetic suction to hold the workpiece. It does not use any energy in work and produces safe, strong and efficient power, which is economical and environmentally friendly.
Ⅱ.Machine tool control function
1.Operation panel
The operation panel is easy to run machine. The button board are integrated together. Such illuminated buttons can be operated as well as related status displays.
2.Operating system touch screen
The operating system of the machine adopts Touch Screen.
III. Main parameter
Item |
Unit |
HG-2340NC |
|
Capacity |
Max. grinding size(W*L) |
mm |
2000*4000 |
Worktable size(W*L) |
mm |
1800*4000 |
|
Max. thinckness |
mm |
600 |
|
Net width of inside |
mm |
2300 |
|
Max. Loading weight |
KG |
15000 |
|
Electric disk size |
mm |
1800*4000 |
|
Grinding head |
Spindle motor |
KW |
22 |
Spindle size |
mm |
Ф170 |
|
rpm |
rpm |
1400 |
|
Grinding wheel size |
mm |
Ф500x80x203 |
|
Motor Power |
Worktable drive motor |
KW |
30 |
Left and right moving motor |
KW |
2.0/10N.M |
|
Up and down moving motor |
KW |
2.0/15N.M |
|
Water pump motor |
KW |
0.5 |
|
Speed |
Front and back moving speed |
M/min |
5-28 |
Left and right moving speedr |
mm/min |
5-3000 |
|
Up and down moving speed |
mm/min |
5-3000 |
|
Size |
Space |
mm |
11000*4600 |
Machine height |
mm |
3600 |
|
Machine Weight |
KG |
45000 |
|
Other |
Power supply |
V/HZ |
380V-50HZ |