 |
| Quantity: | |
|---|---|
GDGM-2014BNC
The Features of CNC double column surface grinding machine
The machine adopts the gantry structure of moving table. The bed is fixed, the worktable moves in the X direction on the bed; the ram moves in the Z direction on the sliding seat; the sliding seat and the ram move in the Y direction on the gantry beam; the X and Y axes adopt heavy-duty linear rails, Z The shaft is a plastic hard rail. The main shaft assembly is placed at the lower end of the ram; the whole machine has a reasonable layout, beautiful appearance and convenient operation.
Spindle box: We use high-speed BT50 spindle unit with center blowing.
Tool Magazine: We use disc magazine with high quality and stable functionality. (Optional)
Transmission: The three-axis motor and high-precision ball screw adopt a direct drive method. The ball screw is pre-tensioned and installed to improve transmission rigidity and positioning accuracy.
Model:GDGM-2014BNC | Unit | Specification | |
Process Range | X axis travel | mm | 2000 |
Y axis travel | mm | 1600 | |
Z axis travel | mm | 800 | |
Spindle nose to worktable surface | mm | 200~ 1000 | |
Distance between two columns | mm | 1400 | |
Worktable | Table Size | mm | 2200×1200 |
MAX Loading weight | kg | 6000 | |
T-Slot (Number/Width/Gap) | - | 7×22×180 | |
Spindle | Spindle Speed | rpm | 6000 |
Spindle Taper | - | BT50 | |
Spindle Motor | KW | 15/18.5 | |
Speed
| Rapid Moving (X/Y/Z) | m/min | 24/24/12 |
Rapid Feed (X/Y/Z) | m/min | 10/10/10 | |
Tool Magazine | Tool Magazine Number | pcs | 24 |
Tool MAX Diameter/length/weight | - | Æ112mm/350mm/15kg | |
Tool MAX Diameter (Full/Empty) | mm | 112/200 | |
Tool selection method | - | any/sequence | |
Time (tool-tool) | S | 1.8 | |
Machine Accuracy | Positioning (X/Y/Z) | mm | 0.02/0.02/0.015 |
Re-Positioning (X/Y/Z) | mm | 0.009/0.009/0.008 | |
Others | Air source | L/min | 280 |
Air pressure | Bar | 6~8 | |
Total electrical capacity | KVA | 40 | |
Water tank capacity | L | 400 | |
Machine size | mm | 5800×3700×4300 | |
Machine weight | kg | 16000 | |
System | FANUC SYSTEM OR Mitsubishi controller | - | Optional |
The information in this catalog are as of Sep.2021,and are subject to change without notice.
© GOODA MACHINERY MANUFACTURING CO.,LTD. All rights reserved.001 Sep.2021
The Features of CNC double column surface grinding machine
The machine adopts the gantry structure of moving table. The bed is fixed, the worktable moves in the X direction on the bed; the ram moves in the Z direction on the sliding seat; the sliding seat and the ram move in the Y direction on the gantry beam; the X and Y axes adopt heavy-duty linear rails, Z The shaft is a plastic hard rail. The main shaft assembly is placed at the lower end of the ram; the whole machine has a reasonable layout, beautiful appearance and convenient operation.
Spindle box: We use high-speed BT50 spindle unit with center blowing.
Tool Magazine: We use disc magazine with high quality and stable functionality. (Optional)
Transmission: The three-axis motor and high-precision ball screw adopt a direct drive method. The ball screw is pre-tensioned and installed to improve transmission rigidity and positioning accuracy.
Model:GDGM-2014BNC | Unit | Specification | |
Process Range | X axis travel | mm | 2000 |
Y axis travel | mm | 1600 | |
Z axis travel | mm | 800 | |
Spindle nose to worktable surface | mm | 200~ 1000 | |
Distance between two columns | mm | 1400 | |
Worktable | Table Size | mm | 2200×1200 |
MAX Loading weight | kg | 6000 | |
T-Slot (Number/Width/Gap) | - | 7×22×180 | |
Spindle | Spindle Speed | rpm | 6000 |
Spindle Taper | - | BT50 | |
Spindle Motor | KW | 15/18.5 | |
Speed
| Rapid Moving (X/Y/Z) | m/min | 24/24/12 |
Rapid Feed (X/Y/Z) | m/min | 10/10/10 | |
Tool Magazine | Tool Magazine Number | pcs | 24 |
Tool MAX Diameter/length/weight | - | Æ112mm/350mm/15kg | |
Tool MAX Diameter (Full/Empty) | mm | 112/200 | |
Tool selection method | - | any/sequence | |
Time (tool-tool) | S | 1.8 | |
Machine Accuracy | Positioning (X/Y/Z) | mm | 0.02/0.02/0.015 |
Re-Positioning (X/Y/Z) | mm | 0.009/0.009/0.008 | |
Others | Air source | L/min | 280 |
Air pressure | Bar | 6~8 | |
Total electrical capacity | KVA | 40 | |
Water tank capacity | L | 400 | |
Machine size | mm | 5800×3700×4300 | |
Machine weight | kg | 16000 | |
System | FANUC SYSTEM OR Mitsubishi controller | - | Optional |
The information in this catalog are as of Sep.2021,and are subject to change without notice.
© GOODA MACHINERY MANUFACTURING CO.,LTD. All rights reserved.001 Sep.2021
