 |
VM-1520NCA
GOODA
| Machine Model: | Please select |
|---|---|
| Quantity: | |
GooDa Gantry Milling Machine VM-1520NCA is a medium-sized CNC machine tool with a powerful gear-driven sprindle, suitable for heavy cutting.
X/Y/Z Travel: 2000*1200*500/550mm
Distance between columns: 1300mm
Gear-driven spindle with high torque,suitable for heavy cutting
GooDa system: autonomous intellectual property, powerful algorithm, and complete functions
Machining Height:
Maximum machining height 500mm
Maximum machining height 550mm
Cutter/Insert:
545/1504 for rough milling;
445/1203 for finish milling.
Control System:
GooDa/Mitsubishi/Fanuc
Magnetic Chuck:
Strip magnet chuck(St.): 1200*2000mm
In addition to the required floor space for the machine, an additional minimum of 800mm space should be provided for maintenance.
Once the length and width lines of the machine are drawn, proceed to drill holes with a diameter of 180mm and a depth of 500mm as indicated in the diagram.
When the machine is in place, place the shim plate in the machine foundation hole, insert the foundation bolt, and then proceed with leveling. Tighten the nuts to secure the horizontal position and then proceed with grouting.
Wait 6-7 days to re-level the machine.
*Note: The drawing above is for reference only; please refer to the actual design drawings for accurate details.
GooDa Gantry Milling Machine VM-1520NCA is a medium-sized CNC machine tool with a powerful gear-driven sprindle, suitable for heavy cutting.
X/Y/Z Travel: 2000*1200*500/550mm
Distance between columns: 1300mm
Gear-driven spindle with high torque,suitable for heavy cutting
GooDa system: autonomous intellectual property, powerful algorithm, and complete functions
Machining Height:
Maximum machining height 500mm
Maximum machining height 550mm
Cutter/Insert:
545/1504 for rough milling;
445/1203 for finish milling.
Control System:
GooDa/Mitsubishi/Fanuc
Magnetic Chuck:
Strip magnet chuck(St.): 1200*2000mm
In addition to the required floor space for the machine, an additional minimum of 800mm space should be provided for maintenance.
Once the length and width lines of the machine are drawn, proceed to drill holes with a diameter of 180mm and a depth of 500mm as indicated in the diagram.
When the machine is in place, place the shim plate in the machine foundation hole, insert the foundation bolt, and then proceed with leveling. Tighten the nuts to secure the horizontal position and then proceed with grouting.
Wait 6-7 days to re-level the machine.
*Note: The drawing above is for reference only; please refer to the actual design drawings for accurate details.
