Views: 0 Author: Site Editor Publish Time: 2022-09-08 Origin: Site
Deep hole drilling machine is the ideal choice for manufacturing, especially for metal materials. What is the use of automatic drilling machine, it can be applied in which industries? What are the characteristics of deep drilling machine?
l What is the use of deep hole drilling machine?
l What are the types of deep hole drilling machines?
l What are the advantages of deep hole drilling machines?
1. A deep hole drill is a metal cutting machine designed to make very deep precision holes in almost any metal. deep drilling machines enable the performance of specific tools such as BTA and gun drill to optimize deep hole drilling processes for manufacturers. The machine is designed to integrate the technologies used by these tools and optimize all aspects of the process to drill deep holes accurately, reliably and efficiently.
2. Deep hole drilling presses are ideal for all sizes of deep holes and production levels, and are required for holes with a depth-to-diameter ratio of approximately 20:1 or more. Dedicated deep hole drilling machines provide tool support, coolant transport and process feedback to enable manufacturers to achieve their deep hole drilling objectives. These features optimize process and prioritize deep hole drilling methods by reducing cycle time, stabilizing tools, chip removal, and preventing tool breakage and process failures compared to CNC machining centers.
3. Complex mechanical parts, such as fuel injectors, diesel fuel rails, heat exchanger tubesheet, aircraft landing gear, etc., all require deep hole drilling machines. Deep hole drilling technology allows for precise cutting depending on material type and thickness. Therefore, most manufacturing industries are developing this specific deep hole drilling press to improve accuracy.
1. There are two main types of tools used to produce deep holes, gun drills and BTA drills. The requirements of these tools determine the design and system of the deep hole drilling press that uses them. In some cases, BTA and orifice plate processes can be combined with coolant and tool changing techniques on a single machine.
2. Sandblasting boreholes are typically used for deep holes with diameters from 1mm (0.040) to 50mm (2.00 in), while BTA boreholes can be used for deep holes with diameters from 20mm (0.80 in) to 250mm (10 in) or more.
1. The deep hole drilling method is much faster than other traditional procedures and therefore has a shorter cycle time.
2. Thanks to its excellent accuracy, it hardly rejects.
3. You can create larger diameter holes.
4. You can also enlarge the aperture further by shaving the holes.
5. Higher permeability.
If you are looking for a supplier of high quality deep hole drilling machine at a reasonable price, the GooDa Company is a very good choice.
