TH-700NC
TH-700NCA
TH-700NCRG
GooDa Duplex Milling Machine TH-700 Series is equipped with secondary developed CNC system, which allows automatic positioning and rotational processing. The numerical control system can be optional and online measurement functions are available depending on your demands.
It follows highly intelligent system and simple operation to complete rough and fine milling of all four sides of the workpiece. It can also perform chamfering as per your needs, achieving high efficiency and precision.
Optional numerical control system;
Optional online measurement function;
High precision, perfect for small metal block processing;
High efficiency and compact design, saving your time and cost.
Belt-type spindle, high precision and efficiency, fine surface finish;
Cutting range: 30-700mm, cutter diameter: φ250mm.
Gear-type spindle, and high torque spindle motor;
Suitable for heavy cutting type and light cutting, with high efficiency;
Cutting range: 60-700mm, cutter diameter: φ250mm.
Highly efficient CNC machine integrated with roughing and finishing functions, high level of automation, good stability;
Four-head milling: 2 belt-type spindles for finishing and 2 gear-type spindles for roughing, largely increase processing efficiency by 5 times!
Saving milling inserts: can be used for multiple applications, such as heavy cutting, roughing and finishing;
Long time stable operation: highly rigid structural design and good shock resistance;
Cutting range: 60-700mm, cutter diameter: φ250mm.
Machine Model | Workpiece material | Cutter diameter | Cutter blade | Cutting thickness | Depth of cut |
TH-700NC | S45C | 250mm | 12 blades | 240mm | 1.5mm(unilateral) |
TH-700NCA | S45C | 250mm | 12 blades | 240mm | 3mm(unilateral) |
TH-700NCRG | S45C | 250mm | 12 blades | 240mm | Rough milling: 3mm(unilateral) Fine milling: 1.5-2mm(unilateral) |
FANUC/SIEMENS/MITSUBISHI system
TH-700NC
TH-700NCA
TH-700NCRG
In addition to the required floor space for the machine, an additional minimum of 600mm space should be provided for maintenance.
Once the length and width lines of the machine are drawn, proceed to drill holes with a diameter of 180mm and a depth of 600mm as indicated in the diagram.
When the machine is in place, place the shim plate in the machine foundation hole, insert the foundation bolt, and then proceed with leveling. Tighten the nuts to secure the horizontal position and then proceed with grouting.
Wait 6-7 days to re-level the machine.
*Note: The drawing above is for reference only; please refer to the actual design drawings for accurate details.
TH-700 Series Operation System:
TH-700 Series Operation System (with online measurement function) :
Functions | TH Series | TH Series(with online measurement function) |
High precision on-line measurement | Optional | √ |
Absolute coordinate processing with no servo plate extension | √ | |
Accurate centering, uniform feed rates | √ | |
External coordinate processing | √ | |
Internal coordinate processing | √ | |
Automatic detection post-processing | √ | |
Memory function for tool feed | √ | |
Pre-loading machining allowance | √ | |
Advanced CNC system | √ | √ |
Automatic positioning | √ | √ |
Automatically complete rough and precision milling on all four sides with one clamping | √ | √ |
System can be easily operated without programming | √ | √ |
Power-off resume processing | √ | √ |
Automatic coordinate centering | √ | √ |
Rapid tool feed | √ | √ |
Modify finished dimensions during machining | √ | √ |
Automatic linkage positioning of worktable and stopper | √ | √ |
Signal sensing control, fast response | √ | √ |
Worktable rotates directly with no tool retract | √ | √ |
Direct machining with servo plate extension (for batch parts) | √ | √ |
Multiple machining methods available | √ | √ |
Optional setting method for workpiece trimming amount | √ | √ |
Automatic correction of machining dimensions | √ | √ |
Automatic correction of tool wear | √ | √ |
Automatic rework of the finished products | √ | √ |
Item | Value | Unit | |||
TH-700NC | TH-700NCA | TH-700NCRG | |||
Cutting capacity | Axis number | 4 | 4 | 6 | / |
Cutting capacity | 2*2 | 2*3 | 2*3 | mm | |
Cutting size | 30-700 | 60-700 | 60-700 | mm | |
Cutting thickness | 240 | 240 | 240 | mm | |
Worktable | Working size | 520*520 | 520*520 | 520*520 | mm |
Max. load capacity | 1200 | 1200 | 1200 | kg | |
Spindle | Cutter diameter | 250 | 250/300 | 250 | mm |
Spindle speed | 50-500 | 50-500 | 50-500 | rpm | |
Spindle motor | 2*15 | 2*22 | 2*22(Gear-type) 2*7.5(Belt-type) | KW | |
Feed | X/Y/Z Max feed speed | 8000/8000/6000 | 10000/10000/10000 | 8000/8000/8000/8000/6000 | mm/min |
Accuracy | Perpendicularity | 0.02 | 0.02 | 0.02 | mm |
Dimensional accuracy | 0.02 | 0.05 | 0.02 | mm | |
Machine weight and size | Machine net weight | ~10000 | ~11500 | ~13000 | kg |
Machine size | L4695*W3800*H2300 | L4528*W3754*H2500 | L4960*W3700*H2300 | mm |
*Note: Parameter above is for reference only, please contact us for more detailed data or inquire customized solutions.