Model:GDVL-1370NC | Unit | Specification | |
Process Range | Three axis travel | mm | 1300/700/670 |
Spindle center to column guide | mm | 827 | |
Spindle end to worktable | mm | 150~820 | |
Worktable | Table Size | mm | 1400×700 |
MAX Loading weight | kg | 1000 | |
T-Slot (Number/Width/Gap) | - | 5×18×150 | |
Spindle | Spindle Speed | rpm | 10000 |
Spindle Taper | - | BT40 | |
Spindle Motor | KW | 11/15 | |
Speed
| Rapid Moving (X/Y/Z) | m/min | 30/30/30 |
Rapid Feed (X/Y/Z) | m/min | 10/10/10 | |
Tool Magazine | Tool Magazine Number | pcs | 24 |
Tool MAX Diameter/length/weight | - | Æ75mm/300mm/7kg | |
Tool MAX Diameter (Full/Empty) | mm | 75/150 | |
Tool selection method | - | any/sequence | |
Time (tool-tool) | S | 1.8 | |
Machine Accuracy | Positioning | mm | 0.01 |
Re-Positioning | mm | 0.006 | |
Others | Air source | L/min | 280 |
Air pressure | Bar | 6~8 | |
Total electrical capacity | KVA | 35 | |
Water tank capacity | L | 430 | |
Machine size | mm | 3820×3170×2800 | |
Machine weight | kg | 9500 | |
System | FANUC SYSTEM OR Mitsubishi controller | - | Optional |
The information in this catalog are as of Sep.2021,and are subject to change without notice.
© GOODA MACHINERY MANUFACTURING CO.,LTD. All rights reserved.001 Sep.2021
This machine is suitable for the multi-variety processing of complex parts such as medium and small boxes, plates, plates, shells, etc. It is widely used in auto parts, valves, engineering machinery, IT equipment, optical equipment, medical equipment and aviation Aerospace and other industries.