Gantry Milling Machine VM-1520NCG

VM-1520NCG Function Introduction

Key Features

GooDa gantry milling machine VM-1520NCG adopts a gantry structure to ensure overall rigidity. It is equipped with double belt-driven spindles with two cutters: the small cutter is used for high-speed roughing for high efficiency, the large cutter is for surface finishing.

This configuration offers high accuracy, excellent surface finish, and reduced tool wear, while also being suitable for both heavy-duty and light cutting operations, largely enhancing production efficiency!

• X/Y/Z travel: 2000*1200*600mm

• Distance between columns: 1500mm

• Double belt-driven spindles

• Cutter for rough milling: Φ80mm, cutter for finish milling: Φ250mm

• High rigidity and high production efficiency!

Machine Configuration

Standard configurations

GooDa system: autonomous intellectual property, powerful algorithm, and complete functions

Optional configurations

Machining Height:

• Maximum machining height 600mm

Cutter/Insert:

• 545/1504 for rough milling;

• 445/1203 for finish milling.

Control System:

• GooDa/Mitsubishi/Fanuc

Magnetic Chuck:

• Strip magnet chuck(St.)

• Strip magnet chuck with local dense(St.)

• Squar magnet chuck(Op.)

Cutting Capacity

Views

Foundation Drawing

1. In addition to the required floor space for the machine, an additional minimum of 600mm space should be provided for maintenance.

2. Once the length and width lines of the machine are drawn, proceed to drill holes with a diameter of 180mm and a depth of 500mm as indicated in the diagram.

3. When the machine is in place, place the shim plate in the machine foundation hole, insert the foundation bolt, and then proceed with leveling. Tighten the nuts to secure the horizontal position and then proceed with grouting.

4. Wait 6-7 days to re-level the machine.

*Note: The drawing above is for reference only; please refer to the actual design drawings for accurate details.

Screen Function Explain