 |
VM-8015NC
GOODA
| Machine Model: | Please select |
|---|---|
| Quantity: | |
X/Y/Z Travel: 1500*800*350/450mm
Distance between columns: 1300mm
Belt-type driven spindle, suitable for finish milling
High efficiency and excellent performance
GooDa system: autonomous intellectual property, powerful algorithm, and complete functions
Machining Height:
Column height 985mm: maximum machining height 350mm;
Column height 1085mm: maximum machining height 450mm.
Cutter/Insert:
545/1504 for rough milling;
445/1203 for finish milling.
Control System:
GooDa/Mitsubishi/Fanuc
Magnetic Chuck:
In addition to the required floor space for the machine, an additional minimum of 600mm space should be provided for maintenance.
Once the length and width lines of the machine are drawn, proceed to drill holes with a diameter of 180mm and a depth of 500mm as indicated in the diagram.
When the machine is in place, place the shim plate in the machine foundation hole, insert the foundation bolt, and then proceed with leveling. Tighten the nuts to secure the horizontal position and then proceed with grouting.
Wait 6-7 days to re-level the machine.
*Note: The drawing above is for reference only; please refer to the actual design drawings for accurate details.
X/Y/Z Travel: 1500*800*350/450mm
Distance between columns: 1300mm
Belt-type driven spindle, suitable for finish milling
High efficiency and excellent performance
GooDa system: autonomous intellectual property, powerful algorithm, and complete functions
Machining Height:
Column height 985mm: maximum machining height 350mm;
Column height 1085mm: maximum machining height 450mm.
Cutter/Insert:
545/1504 for rough milling;
445/1203 for finish milling.
Control System:
GooDa/Mitsubishi/Fanuc
Magnetic Chuck:
In addition to the required floor space for the machine, an additional minimum of 600mm space should be provided for maintenance.
Once the length and width lines of the machine are drawn, proceed to drill holes with a diameter of 180mm and a depth of 500mm as indicated in the diagram.
When the machine is in place, place the shim plate in the machine foundation hole, insert the foundation bolt, and then proceed with leveling. Tighten the nuts to secure the horizontal position and then proceed with grouting.
Wait 6-7 days to re-level the machine.
*Note: The drawing above is for reference only; please refer to the actual design drawings for accurate details.
