 |
VM-1520NC
GOODA
| Machine Model: | Please select |
|---|---|
| Quantity: | |
The Gantry Milling Machine VM-1520NC adopts a BT50 belt-driven spindle to rotate the cutter for the main motion, while the X, Y, and Z axes provide feed for workpieces milling.
The belt-driven spindle achieves a refined surface finish, ensuring excellent smoothness. And the gantry structure improves the vibration resistance so as to ensure high accuracy.
X/Y/Z travel: L2000*W1200*H500
Distance between columns: 1500mm
Belt-driven spindle for finish milling
Cutter diameter: Φ250mm
GooDa system: autonomous intellectual property, powerful algorithm, and complete functions
Machining Height:
maximum machining height 500mm
Cutter/Insert:
545/1504 for rough milling;
445/1203 for finish milling.
Control System:
GooDa/Mitsubishi/Fanuc
Magnetic Chuck:
Strip magnet chuck(St.): 1200*2000mm
In addition to the required floor space for the machine, an additional minimum of 600mm space should be provided for maintenance.
Once the length and width lines of the machine are drawn, proceed to drill holes with a diameter of 180mm and a depth of 500mm as indicated in the diagram.
When the machine is in place, place the shim plate in the machine foundation hole, insert the foundation bolt, and then proceed with leveling. Tighten the nuts to secure the horizontal position and then proceed with grouting.
Wait 6-7 days to re-level the machine.
*Note: The drawing above is for reference only; please refer to the actual design drawings for accurate details.
The Gantry Milling Machine VM-1520NC adopts a BT50 belt-driven spindle to rotate the cutter for the main motion, while the X, Y, and Z axes provide feed for workpieces milling.
The belt-driven spindle achieves a refined surface finish, ensuring excellent smoothness. And the gantry structure improves the vibration resistance so as to ensure high accuracy.
X/Y/Z travel: L2000*W1200*H500
Distance between columns: 1500mm
Belt-driven spindle for finish milling
Cutter diameter: Φ250mm
GooDa system: autonomous intellectual property, powerful algorithm, and complete functions
Machining Height:
maximum machining height 500mm
Cutter/Insert:
545/1504 for rough milling;
445/1203 for finish milling.
Control System:
GooDa/Mitsubishi/Fanuc
Magnetic Chuck:
Strip magnet chuck(St.): 1200*2000mm
In addition to the required floor space for the machine, an additional minimum of 600mm space should be provided for maintenance.
Once the length and width lines of the machine are drawn, proceed to drill holes with a diameter of 180mm and a depth of 500mm as indicated in the diagram.
When the machine is in place, place the shim plate in the machine foundation hole, insert the foundation bolt, and then proceed with leveling. Tighten the nuts to secure the horizontal position and then proceed with grouting.
Wait 6-7 days to re-level the machine.
*Note: The drawing above is for reference only; please refer to the actual design drawings for accurate details.
